If your washer won’t drain but shows no error code, it’s usually caused by a hidden blockage, clogged pump, or partial drainage issue. Here’s how to fix it.
Common Causes
- Hidden clog
- Pump blockage
- Kinked hose
- Filter buildup
- Sensor issue
1. Check the Drain Hose
Remove and flush the hose to clear any hidden debris.
2. Clean the Pump Filter
Remove lint and small objects blocking water flow.
3. Inspect the Pump
Make sure it’s not partially blocked.
4. Reset the Washer
Unplug for 5 minutes.
5. Run Test Cycle
Check if draining improves.
FAQ
Why no error code if it won’t drain?
Not all washers detect partial clogs.