If your washer still won’t drain after cleaning the hose, it’s usually caused by a deeper clog, pump issue, or internal blockage. Here’s how to fix it.
Common Causes
- Internal pump blockage
- Partial clog deeper in system
- Kinked hose behind washer
- Filter buildup
- Drain pump failure
1. Check Pump Filter Again
Small debris may still be stuck deeper inside.
2. Inspect Drain Pump
Remove blockages or check for failure.
3. Check Hose Position
Make sure it isn’t bent or restricted.
4. Reset Washer
Unplug for 5 minutes.
5. Run Test Cycle
Confirm proper drainage.
FAQ
Why won’t my washer drain after cleaning the hose?
Because the blockage is often deeper in the pump system.