If your washer won’t drain after the rinse cycle, it’s usually caused by a clogged hose, blocked pump, or cycle issue. Here’s how to fix it.
Common Causes
- Clogged drain hose
- Blocked pump
- Cycle malfunction
- Filter buildup
- Kinked hose
1. Check the Drain Hose
Remove and flush out any debris.
2. Clean the Pump Filter
Clear lint and small objects from the filter.
3. Inspect the Pump
Make sure it’s not blocked or damaged.
4. Run a Different Cycle
Try a different setting to rule out a control issue.
5. Reset the Washer
Unplug for 5 minutes and restart.
When to Call a Technician
If the issue persists, the pump or control system may need repair.
FAQ
Why won’t my washer drain after rinse?
This is usually due to a clog or pump issue.
Can I fix this myself?
Yes, most drainage issues are DIY-friendly.